|
|
Calculators and
Estimating Tools
The ElectriCalc Pro is the NEC-compliant
electrical reference tool that easily solves calculations in seconds --
wire and conduit sizes, integrated voltage drop, motor full-load amps,
fuse and breaker sizes, and parallel resistance. The Scale Master
II improves productivity with fast, accurate takeoffs from metric
or
imperial scaled or unscaled prints, plans, and drawings. An optional PC
interface easily transfers values into spreadsheet/estimating
programs.
www.CountOnCI.com/wire2
ILSCO Has
Reinvented the Compression Category With a New
ClearChoice® Solution.
SureCrimp® copper compression
connectors reduce inventory requirements by accepting multiple
conductor
classes, including fine stranded and building wire. UL-Listed,
CSA-Certified, and range taking when installed with approved tools and
dies. Circumferential dies produce a tight crimp profile for greater
pull-out strength. The increased contact area reduces resistance and
eliminates the potential for flash.
www.ilsco.com
AC Power Monitors
Power quality analysis helps you locate, predict,
prevent, and troubleshoot problems in power distribution systems.
Telogy
has a comprehensive inventory of Fluke and Dranetz-BMI AC power
monitors
ranging from simple disturbance identification to advanced data
acquisition. Products are available for rental periods as short as one
week.
www.TELOGYLLC.com
1.800.835.6494
Fluke FlexCam
For Under $10,000*
Find out how you can own a powerful Fluke FlexCam
Thermal Imager for under $10,000*. See for yourself why the experts
are
choosing Fluke FlexCam -- better from every view.
*Act now! This is a limited time offer.
www.fluke.com/flexcam
Ground Fault
Safety
Ground faults on industrial and commercial power
systems
must be controlled and located to maximize safety and service
continuity. High-resistance grounded systems using I-Gard's DSP ground
fault alarm/trip system provide ideal protection. Mounted in
switchboards, DSP automatically identifies the faulted feeder and
provides selective feeder tripping on second fault.
www.i-gard.com
Exaktime
Announces JobClock.NET
The JobClock® System saves electrical
contractors time and money by accurately tracking time and attendance.
Now there is an easy and secure way to transfer time and attendance
records over the Internet with JobClock.NET.
Records collected on JobClocks and PocketClocks® can be
transferred any of three ways:
- PC with Internet access
- Palm® PDA, a modem, and a standard phone line
- Palm Treo™ with wireless Internet access.
Call (888) 788-8463 or visit www.exaktime.com to find out why
more
than 500,000 workers clock in every day with The JobClock
System.
Energy Management
Takes Energy Measurement
E-Mon D-Mon Electric Submeters &
Systems
E-Mon’s submetering products are designed to measure
energy and monitor anything from a single circuit to an entire
distribution system in commercial, industrial, multi-family,
educational, and governmental facilities for tenant metering & billing,
cost center analysis, demand management, metering & verification, and
load aggregation and profiling. A variety of communication options are
available, including Internet, ethernet, wireless, and telephone to
interface with new or existing energy management and building
automation
systems.
For details contact E-Mon at (800) 334-3666 or visit www.emon.com/ecm8b.asp.
AEMC's New Ground
Resistance Testing System Models 6472/6474
AEMC® Instruments Models 6472/6474 Ground
Resistance Tester system is the only tester on the market
capable of testing the ground resistance of power transmission towers
without disconnecting the overhead ground conductors -–
this feature alone is a major time and money saver, not to mention a
major safety improvement.
Visit us at www.aemc.com
Maximum Capacity
and Performance with
PAN-WAY PMR40 Metal Raceway
Maximize pathway capacity and performance with
PANDUIT PMR40 Multi-Channel Metal Raceway. Patent-pending offset
snap-on faceplates and divider wall enable terminations to be located
outside the data channel for increased data cable capacity. This fully
compliant TIA/EIA-568B and 569B solution maintains a 2” bend radius
throughout the system for routing high-performance copper and fiber
cable.
www.panduit.com/pmr54
IntraPack
Wet Cell Rack with Integrated Spill Containment Pans Per Tier
IntraPack makes it possible to have spill containment
pans for each rack tier. Designed to fit most cell types either on
1-,
2-, or 3-tier rack. Manufactured with heavy-gauge steel construction
and
powder coated with acid-resistant epoxy paint. Floor pans include
neutralization and absorption pillows. Contact us via email
sales@intrapack or phone 214-348-7105, or at www.intrapack.com.
Ultraline NEMA 4X
Electrical/Electronic Enclosures
Allied Moulded is pleased to announce the launch of its
new line of fiberglass reinforced polyester enclosures.
Ultraline® comes standard with "industry exclusive"
mounting
options, including an out-of-the-box mounting flange or adjustable
mounting feet to cover various mounting configurations. Featuring
molded latch keepers, a tongue-and-groove seal design, and a flange
design that can be retrofit to competition, Ultraline is the ultimate
in
fiberglass enclosures. A clear polycarbonate cover option is also
available for instrumentation applications where critical electronic
equipment must be visible and protected from the elements. For more
information, please contact: Allied Moulded Products, Inc. 222 North
Union Street Bryan, Ohio 43506
www.alliedmoulded.com
enclosures.alliedmoulded.com
O-Z/Gedney Cable
Supports
O-Z/Gedney cable supports have a heritage as strong as
our brand. Our cable supports have been installed in many major
buildings, such as the Empire State Building. With our exclusive
pOZ-grip® process of lining the cable grooves with
coarse-grit and epoxy, you can be sure our cable supports will hang
tough for many years to come.
Visit www.ozgedney.com for more
information.
Mac Victor 2.0
Isolated Power Supply
Designed to supply critical power for industrial
control
panel PLC circuits and local area networks in retail point of sale
applications, the Mac Victor 2.0 is a wall-mounted power supply with
integrated plug and receptacle connectivity for most major
Uninterruptible Power Supply (UPS) manufacturers. The system also
provides an integrated UPS shelf with strapping slots and a UPS
maintenance bypass.
Available in both 2kVA and 3kVA (120Vac, 1PH) models, the Mac Victor
2.0
provides input & output surge protection, transformer based line
conditioning, noise filtering, and up to five output circuit breakers
for electrical distribution to hard wired control panels and/or remote
Isolated Ground (IG) receptacles. Panel-mounted indicator lights
display status of Input & Output power and surge protection. Optional
factory-installed IG receptacles for adjacent plug-in loads.
Mac Victor Power, LLC
www.MacVictor.com
540-220-8116
|
|
You are subscribed to this newsletter as #email#
For questions concerning delivery of this newsletter, please
contact our Customer Service Department at:
Customer Service Department
EC&M
A Penton Media publication
US Toll Free: 866-505-7173
International: 847-763-9504
Email:ecmweb@pbinews.com
Penton Media | 249 W. 17th Street | New York, NY 10011
Copyright 2008, Penton Media, Inc. All rights reserved. This article is
protected by United States copyright and other intellectual property
laws and may not be reproduced, rewritten, distributed,
re-disseminated,
transmitted,
displayed, published or broadcast, directly or indirectly, in any
medium
without the prior written permission of Penton Media, Inc.
|
|
