|
|
Product of the Year Competition
Cast Your
Vote for the EC&M Product of the Year!
Would you like to help pick the prestigious EC&M
Product of the Year winner and qualify for a chance to win $100? If
you're an EC&M subscriber, make your vote count by visiting the
2010
EC&M Product of the Year category winners list. To review
the
products, click on the links for each of the 33 category winners to
read
a brief description and view a photo. Once you're finished with your
review, visit the
polling page, enter your contact information, choose your favorite
product from the drop-down menu, and click submit.Your selection
will
help us identify the 2010 EC&M Product of the Year Platinum,
Gold, and Silver award winners. As an added incentive, three lucky
voters will be randomly selected to receive a $100 gift check. The
voting poll will remain open through 5 p.m. on June 18, 2010. Please,
only one vote per EC&M subscriber. Any votes received from
manufacturers, PR firms, or non-EC&M readers will be
discarded.
AEMC® Introduces the
NEW 5000V Megohmmeter Model 6505
The Megohmmeter Model 6505 is a portable instrument
housed in a rugged field case and operates on either battery or line
power. It performs voltage, insulation, and capacitance measurements.
Insulation resistances up to 10,000 GΩ (10T) can be measured test
voltages from 40 to 5100 can be selected.
The Model 6505 is designed with the highest level of built-in safety
features. This meter incorporates test inhibit capabilities which will
not allow test voltages to be generated if a live sample is detected.
The test terminals are recessed to ensure operating safety.
www.aemc.com
Belden®
FiberExpress® Brilliance®
Connectors
Belden’s FiberExpress Brilliance Field-Installable
Connectors reduce the number of termination steps by 50%, enabling
simple, fool-proof fiber terminations — without tools — in less
than
five seconds! This type of reliability and ease-of-use is unmatched by
any other product in the marketplace today. Click for a FREE Sample
Kit!
JobClock®/EX
JobClock®/EX uses smartphone and
Bluetooth® technologies to deliver fast, accurate time
tracking and powerful foreman tools. Workers clock in using JobClock/EX
clocks located at each jobsite. Foremen collect time records with
BlackBerry® or Windows® phones,
review/approve them, add field notes and instantly send the records
over
the Internet. Learn
more
View Carbon
Footprint Data Via Web-Mon's Energy Dashboards!
Web-Enabled Energy Monitoring from the Makers of
E-Mon D-Mon!
The Web-Mon (Web-Enabled Energy Monitor) provides users with one-page
snapshots of real-time and historical energy usage data accessible via
any standard internet Web browser. Easy-to-read energy dashboards
include kWh, kW Demand, as well as carbon footprint displays of
estimated CO2, NOX, SO2 and other
parameters.
For a free demo call (800) 334-3666 or visit www.emon.com/ecm310a.asp.
Time Mark's
3-Phase
Monitors
With storm season just around the corner, Time Mark
wants to help you protect your valuable equipment against phase loss
with our wide selection of 3-Phase monitors. For more information about
Time Mark’s Model 258 or more 3-Phase monitors, please visit us
online
at www.time-mark.com
or call us at 800-862-2875.
Electric Pedestals
Your source for safe, attractive, outdoor electrical
boxes. PEDOC electrical boxes put an end to the costly "repair and
replace" cycle typical of outdoor conduit/box configurations, where
deteriorated, damaged, and unsafe outlets are common.
www.pedocpower.com
Rugged, Now There's
Proof
Why waste money on tools that break! The new Ti32
Thermal Imager from Fluke is the only rugged thermal imager. Watch this
video — seeing is believing.
www.fluke.com/rugged
Push-In Luminaire
Disconnect
The new Sta-Kon® Luminaire Disconnect
from Thomas & Betts provides a quicker, safer installation method for
replacing ballasts. The slim profile design easily fits through ½"
knockouts. The push-in design features an easy-to-use latch to prevent
accidental disconnects and is finger safe on both sides. The hot wire
entry is also easy to identify. For more information, contact your T&B
authorized distributor, call T&B at 800.816.7809, or visit www.tnb.com/skpush.
Solar Installer
Training
Solar University offers the best 5-day hands-on solar
installer training in the industry. Designed and taught by solar
professionals, our immersion-style training course is the fastest and
most effective way to learn solar. For affordable, small classes with
tons of hands-on learning, call Solar University!
www.SunProTraining.com
Fiberglass
Enclosures Capability Brochure
Allied Moulded manufactures a full line of NEMA Type 4X
fiberglass enclosures offering all the advantages of non-metallic
materials, including: increased strength, reduced weight, corrosion
resistance, UV resistance, and ease of modifications. Along with
Allied’s line of enclosures are many accessories, including: back
panels, hinged front panels, and pole mount kits. For more information
please contact:
Allied Moulded Products, Inc.
222 North Union Street
Bryan, Ohio 43506
Ph: 419-636-4217
Fax: 800-237-7269
Email: sales@alliedmoulded.com
Website: www.alliedmoulded.com
|
|
You are subscribed to this newsletter as #email#
For questions concerning delivery of this newsletter, please
contact our Customer Service Department at:
Customer Service Department
EC&M
A Penton Media publication
US Toll Free: 866-505-7173
International: 847-763-9504
Email:ecmweb@pbinews.com
Penton Media | 249 W. 17th Street | New York, NY 10011
Copyright 2010, Penton Media, Inc. All rights reserved. This article is
protected by United States copyright and other intellectual property
laws and may not be reproduced, rewritten, distributed,
re-disseminated,
transmitted,
displayed, published or broadcast, directly or indirectly, in any
medium
without the prior written permission of Penton Media, Inc.
|
|
