The source for the latest Adhesives/Chemical/Lubricants/Sealants news and product information.
March 8, 2010
Featured Product
New Super Fast Cure Adhesive
Master Bond Polymer System EP65HT-1 provides the first practical solution for dispensing and applying ultra fast-curing two-component epoxy resin compositions. This compound sets up in 3-5 minutes in 10-20 gram masses at room temperature. A specially designed manually operated dispenser eliminates all mixing problems and provides simple reliable application. Master Bond --- Read More

News
Jobs for America
The U.S. economy appears to be emerging from recession, but the severity of this downturn has left substantial underutilized resources in labor and product markets. To close the gap between actual and potential GDP (that is, the full-employment level of output) as quickly as possible, economic growth must accelerate beyond current expectations. Unless sustainable growth is achieved, the unemployment rate will remain close to 10 percent in the immediate future and a portion of the nation's manufacturing capacity will continue to sit idle. Economic and tax policy changes, combined with targeted investment in infrastructure, could effectively stimulate the economy in the near term while positioning the nation for sustained higher economic growth over the medium and long term. Given the current economic environment, a government-backed infrastructure program should be considered as an insurance policy to prevent further layoffs, stimulate job growth, and help restore the confidence of the American labor force. Courtesy of the Milken Institute.
Manufacturing to Grow 5.7% in 2010
Economic growth in the United States will resume in 2010, according to the Institute for Supply Management (ISM) in their December 2009 Semiannual Economic Forecast. Manufacturing revenues will grow 5.7 percent in 2010 compared to a 10.7 percent decrease in 2009. Expectations for 2010 are for the positive conditions experienced in the second half of 2009 to continue in manufacturing, while the non-manufacturing sector foresees marginal growth. The overall forecast projects optimism about the U.S. economy for 2010. The manufacturing sector overall is positive about prospects in 2010 with revenues expected to increase in 13 of 18 industries, while the non-manufacturing sector appears slightly less positive about the year ahead with 8 of 18 industries expecting higher revenues. Business investment, a major driver in the U.S. economy, will decline as both sectors expect a combined average of a 5.4 percent decline in capital spending.
Hot Products
High Temperature, Metallic Adhesives and Putties
BROOKLYN, NY: Durabond™ offers high temperature bond strength and stability, excellent adhesion, machinability, and thermal shock resistance. Durabond™ unique adhesives and putties are specially formulated to bond metals, ceramics and dissimilar materials for use to 2000°F. These metallic composite adhesives overcome the brittle bonds obtained with ceramics and offer some of the ductility and impact resistance associated with soldering and welding. Durabond™ adhesives can be drilled, tapped, machined, etc. They do not contain epoxies or silicones, which would limit their use to 600°F. These composites are inorganically bonded and chemically cured. Ideal for repairing and rebuilding cracked metal housings, exhaust manifolds, molds, dies, boilers, pipes, fittings, worn shafts and castings. --- Cotronics Corp.
P-80® RediLube Temporary Rubber Assembly Lubricant
BURLINGTON, NJ: P-80 RediLube rubber assembly lubricants provide temporary lubrication that can ease assembly of tight-fitting parts. P-80 RediLube is designed for use on non-porous and coated rubber surfaces. It provides a high degree of lubrication but dries quickly, making it ideal for sub-assembly. Uses include installation of hoses, bushings, seals, o-rings, grommets, and grips. P-80 RediLube is biodegradable and does not contain alcohol, petroleum distillates, or silicone. It is safe to use on most natural and synthetic rubbers, metals, and plastics. --- International Products Corp.
Super-resilient "Nano-Ceramic" Lubricant
DAYTON, OH: DAYLube™ lubricating grease utilizes nano ceramic particles that act as sub-microscopic "bearings," providing continuous lubrication to steel surfaces. DAYLube™ lasts ten times longer than standard PTFE greases; offers a much lower coefficient of friction at all temperatures; provides extraordinary adhesion; and gives higher load-bearing properties than traditional high-performance greases. DAYLube™ was created with the use of nanotechnology, a process that involves the development of new, better, and more cost-effective materials at the molecular level. Key components in DAYLube™ are nano ceramic "bearings" that have an affinity for steel, and provide continuous lubrication at the surface. These are fabricated over a calcium sulfonate thickener within a mid-viscosity petroleum-based paste. --- Dayton Progress Corp.
PRODUCT DEMOS/VIDEOS

Play Demo!Kano Laboratories - Penetrating/Lubricating Oil
Kroil is now available in 8 sizes including a new 16.5 oz. Industrial Size aerosol, Aero Kroil, and an 8 oz. non-aerosol. Other bulk sizes include 1,5,15 and 55 gallons.
Play Demo!





View More Adhesive Demos!For more free Adhesives, Sealants & Lubricants product demos, Click HERE. View product demos on Adhesives, Cements, Lubricants, and more!
To Subscribe to this eNewsletter, CLICK HERE

This eNewsletter was sent to: #email#

To Unsubscribe CLICK HERE

Copyright 2010
New Equipment Digest Magazine
Penton Media, Inc.
1300 East 9th Street
Cleveland, OH 44114
Phone: 216-696-7000