 |
LISTA INTERNATIONAL ROLLS-OUT INNOVATIVE, NEW
SUSPENSION SYSTEM FOR DRAWER CABINETS
Lista International introduces an exclusive, new suspension system for
its modular storage drawer cabinets and Storage Wall® systems. Lista
drawers are unique in the industry, with outstanding capacity and
durability that is the direct result of superior engineering and
construction. The drawers now feature an innovative suspension system
which ensures the smoothest and quietest operation–even when fully
loaded.
The new suspension system incorporates a guide track that wraps under
the drawer body for added stability and strength. This unique system
features quiet Polyoxymethylene (POM) bearings, combining strength,
hardness, dimensional stability, fatigue resistance, low wear and low
friction.
All Lista drawers and roll-out trays extend 100% from the cabinet
housing, allowing easy, ergonomic access to the entire contents, even in
the farthest corners. All four sides of drawers are fully reinforced for
maximum integrity, and feature full-height sidewalls for maximum storage
capacity. Lista drawers are now available in two full-extension weight
capacities: 440 lbs or 165 lbs, depending on drawer size.
Lista International Corporation
1-800-722-3020
sales@listaintl.com
www.listaintl.com
|
|
Wearwell's Industrial WorkSafe® Ergonomic Mats
Industrial WorkSafe® and Industrial GritWorks!® provide a solution to
standing worker fatigue in areas with mineral oil-based cutting fluid.
They are comfortable, ergonomic mats made with CFR–a mineral oil
based cutting fluid-resistant compound. They also hold up to many other
industrial chemicals and are the perfect solution for heavy use and
multiple-shift facilities.
Sized for individual workstations, they are 7/8" thick and extremely
resilient. The mats feature bright, molded-in safety borders and a
textured surface for more traction in wet areas. The smooth, clean
drainage holes and underside knobs allow water, debris, and shavings to
flow through and under the mat.
When extra traction is needed, Industrial GritWorks!® will do the
job. The GritWorks!® surface provides a coefficient of friction that
exceeds OSHA recommendations by over 40%.
Not only are Industrial WorkSafe® and Industrial GritWorks!®
Wearwell's most comfortable molded rubber mats available–they're
also the hardest working! www.wearwell.com
|
|
100,000 Mechanical Components
Redesigned website offers more than 100,000 inch and metric
mechanical components. Users can request eight comprehensive product
catalogs, plus a CD for free delivery. --- Stock Drive
Products/Sterling Instruments
Read
More
|
|
Pulsed Fiber Laser
New brochure describes and illustrates the advantages of the
ProMark fiber laser and the types of materials that it can mark.
Standard and custom laser solutions are featured. There is also a brief
description of the new laser marking workstation. --- Columbia
Marking Tools
Read
More
|
|
HOT NEW PRODUCTS - Editor's Choice
|
Dust & Weather Proof Rocker Switch
BEAVERTON, OR: Phaseda LLC introduces its dust and weatherproof
power rocker switch - KND2-series. The KND2-series rocker switch snaps
into industry standard panel cut-out size 0.862 x 1.169" (22 x 30mm).
Its unique internal design provides reliable protection against dust and
water up to IP55, without external PVC cap. The functions include DPST
On.Off, momentary (On).Off; DPDT On.On, On.Off.On, (On) ON, and two
sides momentary. The switch comes with 0.250" tab terminals for easy
push-on assembly. In addition, this switch has bi-color actuator, making
it more appealing in some applications where it is necessary to identify
the ON position of the switch. This waterproof rocker switch has AC and
DC rating, approved by UL at 20A 125VAC, and 20A 36VDC, which is common
in DC power tool products. --- Phaseda, LLC
Read
More
|
|
Integrated Marking Unit
CHARLOTTE, NC: With an extremely fast marking speed of up to 10
characters per second, the new Technifor XF510Cp compact integrated
marking unit offers higher quality marking than inkjet systems and is
less costly than CO2 lasers, providing users with a new level of high
speed marking performance and quality for both metallic and plastic
parts of various shapes and sizes. The innovative XF510 incorporates
backward and forward movement to mark parts twice as fast as current
Technifor machines helping to eliminate production bottlenecks with new
marking cycle times. Standard interactive features include RS232, USB,
Ethernet connections and 8 Input/4 Output card. The control unit is easy
to use with its TO5 piloting software with icons and pop-up menus. In
addition the communication terminal interface gives the start marking,
cycle end, cycle stop, machine ready to mark and marking underway
information for enhanced production efficiency. --- Technifor,
Inc.
Read
More
|
|
NEW! Air Preparation Equipment from Bimba
Bimba strives to offer a complete solution for all your pneumatic
applications. That's why we are proud to announce a full line of Air
Preparation Filters, Regulators and Lubricators (FRLs) and optional
accessories including porting blocks, shut-off valves, gauges and more.
FRLs are available in three sizes, Miniature 1/8", 1/4" NPT,
Compact 1/4", 3/8", 1/2" NPT and Large 1", 1-1/2" NPT. To
learn more about Air Preparation Equipment visit, www.bimba.com/FRL
Federal Signal releases new Total Solutions
Product Selection Catalog
Federal Signal introduces their new Total Solutions Product
Selection Guide. This 386 page catalog features colored product
sections, product indexing, newly launched LEDs with eXtreme Light
Technology (XLT™), international product offering and
highlights Federal Signal's 5 year warranty offering. Visit the Federal
Signal updated website for all your signaling and security needs. www.federalsignal-indust.com
Use igus' Online Expert System to Find the Perfect
Plastic Bearing
Igus®, the developer of iglide® plastic bearings and DryLin®
linear bearings and guide systems, offers an online predictability
calculator for discovering which bearing is right for your application.
Compute wear rates, life expectancies, operational temperatures, radial
forces and more, all at the touch of a button. Iglide and Drylin
bearings are maintenance-free and will not corrode. The company's
Expert System is available at no cost to users. Try it today.
Request complimentary samples. www.igus.com/iglide
THE CM CLEAN ROOM HOIST: THE PERFECT CHOICE FOR
SENSITIVE ENVIRONMENTS
Enjoy proven CM Lodestar Electric Chain Hoist performance in any clean
room, from basic wipe down to complete wash-down environments. The
Lodestar provides reliability and consistency for many applications.
From food processing to circuit board assembly, the Lodestar means
maximum production and long-life. The Lodestar offers superior
efficiency and versatility in work areas that include high humidity,
corrosive materials, and sanitary conditions. A stainless steel load
chain and sealed, weather-proof construction exceed clean room
standards. www.cmindustrial.com
Tom's Secret Formula B-404 All-Purpose Lubricant and
Cutting Oil
Tom's Secret Formula B-404 All-Purpose Lubricant and Cutting Oil are
biodegradable and formulated with optimized USA-grown vegetable oils and
selective additives. These earth-friendly lubricants do not contain
chlorine or regulated toxins, safe for all metals and do not evaporate,
providing long-lasting lubrication. B-404 All-Purpose Lubricant and
Cutting Oil cling to surfaces, providing lubrication longer than
conventional petroleum-based products. Both products have outperformed
typical petroleum-based lubricants in terms of lubricity, penetration
and anti-wear properties. www.tomssecretformula.com
New IDEC Emergency Stops are the Ultimate in
Safety
30mm IDEC XN E-stops are the first and only to incorporate innovative
technology that provides an higher level of function and safety.
Inspired by the lockout concept, the XN padlock-type E-stops were
developed to prevent unauthorized or accidental resetting of latched
emergency stop switches, by allowing the use of personal padlocks.
IDEC’s unique "Safe Break Action," also ensures NC contacts will open
no matter what. www.idec.com
|
|
Make Some Damn
Mistakes
In the business world today, many executives are afraid of
taking risks. The common belief is that so long as you don't make a
mistake, you're generally safe. "But safe from what?" asks
organizational development expert, Linda Finkle. "Are you avoiding
failure – or are you actually avoiding success?" DC coaching firm,
Incedo Group, brings to light the challenges CEOs and key executives
face when they take a risk. Each business risk is fraught with the
possibility of making a mistake and an end result of losing face or even
your position. Many are fearful of making wrong decisions. Incedo Group
brings this fear to life to life with their newest multimedia video.
Incedo's latest short movie is based around how risk-taking and
mistake-making is, in fact, more likely to be a springboard to your
company's success. Marrying the cutting edge world of coaching with
viral video technology, Incedo Group is pleased to announce their most
recent 5-minute online movie, Make Some Damn Mistakes.
The movie can be seen at www.MakeSomeDamnMistakes.com.
|
|
Industry Deck |
 JULY INDUSTRY DECK
View the latest Industry Deck to learn more about new products
from
EXAIR, Deublin, Cole-Parmer, and more. View the Deck Here!
Click HERE to view archived
Industry Decks. |
|
|
|
www.IndustrialProductDemos.com
|
 The Art of the
Product Demonstration is Back!
See the latest interactive manufacturing and industrial product demos
and videos. You will find interactive animated tutorials that walk you
through the product's specs, features, parts, applications, and
accessories. Locate demos by selecting a category or keyword search.
Visit Now!
|
|
|
|
|
|
|
|
To Subscribe to this eNewsletter, CLICK
HERE
This eNewsletter was sent to: #email#
To Unsubscribe CLICK HERE
Copyright 2008
New Equipment Digest Magazine
Penton Media, Inc.
1300 East 9th Street
Cleveland, OH 44114
Phone: 216-696-7000
|
|
| |