 |
PRECISION SHAFT ALIGNMENT IS ONLY 3
STEPS AWAY with OPTALIGN SMART
There are quite a few laser alignment options out there these days. Why
should you buy OPTALIGN SMART?
Patented Continuous Sweep measurement technology takes hundreds of
readings continuously as you rotate the shaft
Automatic tolerance evaluation
Graphical alignment displays
Fully modular, customizable to meet your exact requirements and
budget.
Obtain alignment results in 3 Easy Steps: Enter Dimensions –
Measure—start and stop at any position – View Results.
Free reporting PC software, full color screen and Bluetooth wireless
communication, to name just a few.
See
VIDEO online.
LUDECA, INC.
305-591-8935
info@ludeca.com
www.ludeca.com
|
|
Actuators, Valves, Air Preparation
Site offers 2D and 3D CAD drawings featuring actuators, valves,
air preparation products, pressure switches, and fittings. Downloads are
available in 28 different format options for 3D and 8 format options in
2D. --- Norgren
Read
More
|
|
Cost Savings in Compressed Air
Systems
Updated "Cost Savings with Compressed Air System Maintenance"
guide helps your facility save money by maximizing efficiency and
extending the life of your compressed air system. The reference manual
outlines maintenance activities for all aspects of the system. ---
Kaeser Compressors
Read
More
|
|
HOT NEW PRODUCTS - Editor's Choice
|
GFCI Protected Industrial Cord
Reels
MILFORD, CT: Hubbell Wiring Device-Kellems is pleased to
announce the availability of our newest addition to the Industrial Cord
Reel offering, GFCI Protected 15A and 20A reels. Hubbell WDK has taken a
leadership position by developing the first GFCI cord reel that is
compliant with UL 355, Standard for Cord Reels. In many installations,
specifying engineers call for cord reels to be GFCI protected. In the
past there were only two ways to achieve this, either by mounting a GFCI
receptacle in the facility ceiling outlet box, which would be virtually
impossible to access in the event of a fault, or to put a GFCI
receptacle in the portable outlet box hanging from the reel. The problem
with this solution is that if the neutral were to be cut on the cable
feeding the outlet box, there still may be power present but the GFCI
would not function as desired. Hubbell actively petitioned UL to
evaluate this potentially dangerous condition and lead UL to revise the
standard. --- Hubbell Inc.
Read
More
|
|
Buy Off-the-shelf Cable and Connector
Assemblies Online
Purchase off-the-shelf, factory-direct, high-grade cable and connector
assemblies online from NorthwireDirect. Over 100 products are available.
Bulk cable and connector assemblies that are ordered by noon are shipped
the same day. Retractile cords are shipped after receipt of the order
in 3-5 days. Major credit and debit cards and PayPal are accepted. No
minimum order. Northwire, Inc.
Read More
|
|
Square Fans
New York Blower Square Fans combine heavy-gauge, industrial
construction with the convenience and economy of a direct-drive design
for tight footprints. Square Fans are designed for clean-air
applications including pneumatic conveying, product drying, product
cooling, supply air and exhaust on the clean-air side of dust collection
systems.
Read More
|
|
Extend service life with continuous-flex
cables
Lower costs with continuous-flex cables, which are ideal for high cycle,
automated applications. Chainflex cables are designed for installation
in Energy Chain cable carriers. They eliminate corkscrewing, conductor
damage and general cable failure. Chainflex cables withstand extremely
tight bending radii and perform better than traditional cables when
constantly cycling at high speeds or exposed to abrasion. Extend the
service life of your machine and lower maintenance costs. Download
igus' new Chainflex catalog now.
Read More
|
|
New MXB-P belt-driven actuators from Tolomatic
combine speed with load-support guidance
Tolomatic MXB-P belt-driven linear actuators feature a profiled
rail guidance system that allows large moment loads, high-speed
operation and high precision. MXB-P belt-driven actuators are ideal for
multi-axis applications that require high linear velocities and
accelerations, long stroke lengths and high duty cycles, including test
stations, product handling, and laser marking.
Read More
|
|
Litigation in
Manufacturing
A study by the law firm Fulbright & Jaworski LLP on
manufacturing industry disputes found that 75% of manufacturing
companies faced at least one new lawsuit last year, with 53% facing 6 or
more new suits in the past year. And 25% of the manufacturing companies
surveyed reported facing at least one $20 million action. Litigation has
obviously become a major line item in manufacturing company budgets.
Nearly a quarter (26%) of the manufacturing firms reporting in the
Fulbright study said that they spent at least $5 million on litigation,
excluding costs of settlements and judgments, while 51% reported
spending over $1 million per year on business disputes.
|
|
 The Art of the Product Demonstration is
Back!
See the latest interactive manufacturing and industrial product demos
and videos. You will find interactive animated tutorials that walk you
through the product's specs, features, parts, applications, and
accessories. Locate demos by selecting a category or keyword search.
Visit www.industrialproductdemos.com
Now!
|
|
|
|
ADVERTISEMENT
|
|
|
To Subscribe to this eNewsletter, CLICK
HERE
This eNewsletter was sent to: #email#
To Unsubscribe CLICK HERE
Copyright 2008
New Equipment Digest Magazine
Penton Media, Inc.
1300 East 9th Street
Cleveland, OH 44114
Phone: 216-696-7000
|
|
| |
