 |
Get the Metal Out
Hi-temp Machine-Mounted All-Metal Separators for extruders, injection
and blow molders
Bunting® Hi-Temp Machine-Mounted All-Metal Separators provide
efficient rejection of both ferrous and nonferrous metal contaminants
and fit where headroom is limited. Designed especially for choke-feed
applications where the product is at a higher than normal temperature,
they can bolt directly to the in-feed of processing equipment and
support the weight of hoppers and bins. A fast pneumatic rejection
mechanism aided by precise timing results in accurate cycling and
conservation of good material.
- Separators install directly above infeed.
- Rugged housings allow mounting other equipment.
- Precise timing results in accurate cycling.
- Fast pneumatic reject mechanism reduces good product waste.
- Slide gate rejection design eliminates contaminant "leaks".
Bunting® offers a variety of metal detector models specifically
designed for free-flowing gravity-fed products, pneumatically conveyed
materials, materials on conveyor belts, and even liquids. --- Bunting
Magnetics
Read More
|
|
Tolomatic electric screw actuators improve
accuracy
A leading packaging equipment manufacturer recently faced the problem of
how to compensate for inconsistent bag dimensions on its popular modular
bag filling and sealing system. Since repeatability is critical to the
filling and sealing operation, engineers sought a solution that would
increase accuracy, flexibility and productivity for packagers. They
found their solution in four electric screw linear actuators from Tolomatic
that were modified to precisely position incoming empty bags. The
bagging system now automatically compensates for variations in bag
dimensions and eliminates manual setup when changing bag sizes. ---
Tolomatic
Read More
|
|
Energy Industry Technology
New website provides engineers and professionals in the global
energy industry with a comprehensive resource for application-specific
power transmission and motion control solutions. Categories covered
include steam turbines, fans and blowers, gas turbines, wind turbines,
inclined conveyors, and more. --- Altra Industrial Motion
Read More
|
|
Washer Catalog
2009 Washer Catalog serves as an easy-to-use specifying guide,
featuring 23,000 non-standard washer and spacer sizes. The selection
includes outside diameters from 0.080 to 5.140 in., numerous inside
diameters, thicknesses, and more than 2,000 material options. ---
Boker's, Inc
Read
More
|
|
HOT NEW PRODUCTS - Editor's Choice
|
Sensors Operate Reliably in Hot, Cold, Wet,
and Nasty Environments
Schaumburg, IL: Specially targeted for use in the Food &
Beverage Industries, E2EH inductive proximity sensors in a food-grade
316L stainless steel housing provide reliable metal object or machine
part detection in demanding environments. The sensor to withstands
high-temperatures up to 120 degrees Celsius and resist corrosion from
detergents and disinfectants used in the Food Industry and its
performance has been tested and certified by EcoLab. The E2EH sensor
offers increased sensing range (up to 12mm) that also helps avoid
collision damage with passing objects. In addition to the 316L stainless
steel housing, the sensor uses a rugged PBT sensing surface and
heat-resistant PVC cable that meet the requirements of Food & Beverage
Industries. --- Omron Electronics LLC
Read
More
|
|
Unilift Pallet Handler
ONTARIO, CA: UniLift™ enables both the transport and
ergonomic positioning of a standard GMA pallet without straddling it.
"After several years of design, research and development, we have
achieved our goal - a product that enables a worker to pick up a
standard GMA pallet or skid without straddling it, transport it to their
work area, and ergonomically position the load - all with one product,"
reports Bob Clark, VP of Sales and Marketing for Bishamon. "The unique
deployable outrigger design gives UniLift™ the handling and
steering characteristics of a standard pallet jack." The UniLift™
is designed with electronically deployable outriggers that are operator
actuated after the pallet is raised in transport mode. This unique
feature enables the operator to lift the pallet or skid up to 34" in
height, providing unparalleled ergonomics in a non-straddle pallet
transporter. --- Bishamon
Read
More
|
|
Replace Your Old "Plastic" Gate with "R" Gate
The FabEnCo R-Series Self-Closing Safety Gate is a rugged, spring-loaded
metal gate designed specifically to replace worn, stuck or broken
"plastic" gates in the workplace. FabEnCo's unique stop mechanism
provides positive stop without opposite post contact. Competitively
priced and easy to install, the R-Gate is available in a variety of
metals and finishes, and retrofits to the existing holes of an old
"plastic" gate. --- FabEnCo
Read More
|
|
Energy Series Chain
High productivity, high speeds, high shock loads, and high cyclic
loading in the oil field put great demands on roller chain. U.S. Tsubaki
builds performance into every Energy Series chain. We start with the
highest quality steel, manufacture all parts to stringent tolerances,
and provide the most effective heat treatment processes to maximize
tensile strength and shock load resistance. That means oil field chain
that is long-lasting in the toughest applications. --- U.S.
Tsubaki
Read More
|
|
High Current Surge Test Adaptor
The lower impedance of series wound armatures makes it difficult to
surge test bar-to-bar. The AT101-ZTX high current surge test adaptor has
been designed to successfully test DC motors, form coils, and other low
impedance windings with an AWAIV-6, AWAIV-12 or AWAIV-12HO tester.
Contact Baker at 800-752-8272. --- Baker Instruments
Read More
|
|
Hazard Monitoring System
Electro-Sentry™ Hazard Monitoring System combines shaft speed,
belt alignment and bearing temperature measurement into a single
solution, and features the Command Center™ touch screen display
for easy monitoring and fast alarm identification. Components are simple
to install with no end-user calibration necessary, and Electro-Sentry
utilizes standard 4-20mA signals. --- Electro-Sensors
Read More
|
|
Inflatable Seated Butterfly Valve
Posi-flate butterfly valves utilize an innovative inflatable seat to
seal with air pressure, not friction like conventional valves.
Posi-flate valves are available in sizes from 2" (50mm) to 30" (750mm)
in a wide variety of materials of construction, including stainless
steel and aluminum, and fit both ANSI and metric flanges. --- Posi
Flate
Read More
|
|
New I-HUB For Aviation Reels
Hannay Reels offers significant savings with its new I-Hub swivel joint,
a compact, low maintenance hub/swivel assembly engineered exclusively
for Hannay aviation reels. Designed to handle 2-1/2" and 3" I.D. hose,
the I-Hub eliminates possible leak points because it has no threaded
interface. --- Hannay Reels
Read More
|
|
Velcro Fastening Systems
Rip-Tie, a platinum status Velcro® distributor, has sew-on and
adhesive back hook and loop in stock AND dots from 3/8" to 1-7/8".
Please call us to discuss your application, receive a price quote or
place an order. We also have cable management straps and can custom make
straps for you. --- Rip-Tie
Read More
|
|
New Study Documents Progress of
Manufacturers Toward IT and Controls Engineering
Convergence
Rockwell Automation has released results of a new study
representing a broad cross-section of manufacturing industries revealing
that companies progressing toward converging their IT and controls
engineering organizations are reaping major benefits, including higher
efficiency, increased reliability, shorter project timelines and better
business continuity. The study also found that those with more
integration between these functions experience less conflict and are
more optimistic
about the future of convergence. For a copy of the original
IT-Engineering Convergence Whitepaper, click
here.
|
|
PlantEngineeringSouthShow.com
• March 11-12, 2009 • Charlotte Convention Center;
Charlotte, NC
The resource event for plant engineering professionals, operations
teams, and executives. Showcasing leading suppliers with the innovative
products and technologies you need to stay at the forefront of your
industry.
Read More
|
|
COMPACT CABINET COOLERS
Noren Products manufactures air-to-air and air-to-water heat exchangers
for cooling electrical panels without letting contaminants inside
(including wash down, and hazardous locations). COMPACT CABINET COOLERS
prevent failures/downtime caused by overheating electronics. ---
Noren Products
Read More
|
|
Your Press Release to 1800 Trade Journal Editors for only $350
US. Releases and hi-res photo are sent via full graphic html email
and text link to assure great results.
Read More
|
|
 The Art of the Product Demonstration is
Back!
See the latest interactive manufacturing and industrial product demos
and videos. You will find interactive animated tutorials that walk you
through the product's specs, features, parts, applications, and
accessories. Locate demos by selecting a category or keyword search.
Visit www.industrialproductdemos.com
Now!
|
|
|
|
|
|
|
To Subscribe to this eNewsletter, CLICK
HERE
This eNewsletter was sent to: #email#
To Unsubscribe CLICK HERE
Copyright 2009
New Equipment Digest Magazine
Penton Media, Inc.
1300 East 9th Street
Cleveland, OH 44114
Phone: 216-696-7000
|
|
| |
