|
|
Compact Equipment
Compact
wheel loader
The new Terex TL210 compact
wheel loader is designed with a spacious operating cab, a heavy-duty
chassis, the Terex cooling system with reversible fan, Tier-3 engine
compliance and modified tool carrier linkage. For the first time in the
Terex mid-sized wheel loader range, the power transmission in the
hydrostatic drive unit of the TL210 is carried out via a hydrotransmatic
transmission with two regulating motors and a pump. In the entire speed
range between 0 and 25 mph, the traction force and speed are optimized
automatically and without interruption.
Back to Top
Compact
track loader
The John Deere CT322 compact
track loader is designed by rigorous construction work such as final
grading, site development and excavation in dry or wet soil conditions.
Durable tracks ensure continued uptime and productivity, even on
hillsides. A turbocharged 4-cylinder John Deere PowerTech diesel engine
delivers reliability, power and torque. The Quik-Tatch hitch quickly
accommodates a variety of Worksite Pro attachments.
Back to Top
Heating and Ventilation Equipment
Air
ventilators
Americ’s VAF Series air
ventilators are designed for most confined space applications. Americ
offers 8-inch, 12-inch and 20-inch models for applications ranging from
man cooling to hazardous space atmospheres. Manufactured of durable,
high-density polyethylene plastic, the VAF Series is portable and
lightweight. Power sources range from 110-volt AC, 220-volt AC, 12-volt
DC to pneumatic. Cfm ratings range from 848 cfm to 8,000 cfm.
Back to Top
Mobile
furnace
The Dragon K85 mobile furnace from Dri-Eaz is built to provide clean,
even heat for a variety of applications. With 85,000 Btu of heating
power and 1,200 cfm, the Dragon can be used for water damage restoration
work, and as a tent heater for special events and party rentals. It can
also be used to dry crawlspaces or other unheated areas, and for
temporary heat during construction, remodels or HVAC repairs. The Dragon
produces heat without any added moisture or fumes. Unlike a propane or
kerosene heaters, the Dragon uses an indirect-fired heat exchanger to
warm the air. It features a dual-air exhaust for supplying heat to two
areas at once, a 91-percent fuel efficiency rating, and a remote
thermostat for maintaining optimum temperature.
Back to Top
Demolition Hammers & Tools
Combihammers
The Hilti TE 70 and TE 70-ATC
(pictured) combihammers feature a 1,600-watt motor for fast drilling in
various applications and materials, as well as chiseling and demolition
of concrete and masonry. The TE 70-ATC features Hilti’s Active Torque
Control technology, which shuts off power in the event the tool housing
begins to rotate too quickly. The units offer improved power-to-weight
ratio and feature an optimized mechanical clutch to provide maximum
torque.
Back to Top
Hand-held
breakers
The TEX pneumatic hand-held breaker series from Atlas Copco Construction Tools
includes the 34-pound TEX 140PS and 42-pound TEX 180PS. Each breaker
comes standard with a SoftStart two-step trigger that allows the
operator to fully control the chisel when starting a cut. Two ergonomic
vibration-reduced versions of the standard units, the TEX 150PE and TEX
190PE, are available with spring-loaded handles and a unique
hand-and-arm protection system that combines to prevent 75-percent of
vibrations.
Back to Top
Outdoor Power Equipment
Rough-terrain
mower
MacKissic introduces the
Merry Commercial self-propelled rough-terrain mower, which cuts thick,
high grass as well as saplings up to 1½-inch diameter. The mower is
available with a 13-hp Briggs & Stratton engine, a 13-hp Honda engine,
or a 15-hp Kawasaki engine. The unit includes electric start and
features a 26-inch-wide pivoting cutter deck, four forward speeds plus
reverse, puncture-sealed floatation tires and a locking differential for
single- or dual-wheel drive.
Back to Top
Stump
cutters
The Vermeer SC252 stump cutter
features a 27-hp engine and rubber tires. Control handles for travel,
swing and raise/lower functions are equipped with sensors that recognize
the presence of the operator’s hands. If the operator’s hands leave
the controls for more than half a second, the clutch will automatically
disengage. The cutter wheel brake will engage and the “cutting wheel
engaged” indicator light will begin flashing. If contact with the
handles is resumed within two seconds while the cutting wheel indicator
light is still flashing, the cutter wheel brake will release and
operation may resume.
Back to Top
Scaffolding
Vertical
lift
The new PT 10 is the first vertical lift offered in the Bil-Jax Apex Series, which focuses on
self-propelled and push-around vertical lifts. Lightweight, compact and
durable for indoor or outdoor use, the battery-powered PT10 is designed
for maintenance and construction applications. It is an up-and-over lift
with the platform area of a traditional scissorlift. The PT10 has stowed
dimensions of 30 inches wide and 6-feet, 3-inches high. Its maximum
working height is 16 feet, 1 inch.
Back to Top
Extension
ladder
The Equalizer extension ladder from Werner Ladder is designed with
factory-installed integrated leg levelers for added safety while working
on uneven ground. The Werner-exclusive built-in EverLevel System is an
easy-to-use integrated leveler. The leveler leg, with its dual-channel
holes allows the ladder to be adjusted in 3/8-inch increments up to 8
¼-inch to help the user set the ladder more accurately. A durable
zinc-plated-steel locking pin with detent ball secures the leveler at
the proper height. The Equalizer is available in two aluminum models —
the D1700 Series, a Type II duty-rated model with a load capacity of 225
pounds and the D1800 Series, a Type I duty-rated model with a 250-pound
load capacity.
Back to Top
|
|
You are subscribed to this newsletter as #email#
To get this newsletter in a different format (Text or HTML),
or to change your e-mail address, please visit your profile
page to change your delivery preferences.
For questions concerning delivery of this newsletter, please contact our
Customer Service Department at:
Customer Service Department
RER Magazine
A Penton Media publication
US Toll Free: 866-505-7173
International: 847-763-9504
Email:rermag@pbinews.com
Penton Media | 249 W. 17th Street | New York, NY 10011
Copyright 2008, Penton Media. All rights reserved. This article is
protected by United States copyright and other intellectual property
laws and may not be reproduced, rewritten, distributed, re-disseminated,
transmitted,
displayed, published or broadcast, directly or indirectly, in any medium
without the prior written permission of Penton Media.
|
|
