|
|
Skid-steer Loaders
Compact
track utility loader
The Ramrod Taskmaster 1150 LKD diesel-powered compact track utility
loader has a lift capacity of 1,150 pounds and a carrying capacity of
2,300 pounds. The unit also features a patented high-torque
hydraulic-drive system that provides 1,600 pounds of tractive power. The
high, uninterrupted output to hydraulic functions means greater lift
capacity and the power to drive attachments. In addition, turf-tred
tracks operate in dirt, mud and snow, and have no lug pattern thus
preserving the turf.
Back to Top
Skid-steer
loader
The L175 skid-steer loader from New Holland Construction is
designed with a 2,000-pounds SAE-rated operating capacity, a bucket
breakout force of 4,300 pounds and an operating weight of 6,230 pounds.
The L175 has a New Holland turbocharged engine rated at 60 gross hp and
offers a full 10-foot lift height and 29 inches of forward reach.
Back to Top
Skid-steer
loader
Mustang added a 99-hp
Cummins diesel engine to its 2109 skid-steer loader. The Tier-2
emissions-certified, turbo-charged engine offers 305 foot-pounds of
torque. The engine offers easy access to important maintenance points,
including the dipstick, oil fill and air cleaner. The conventional
liquid-cooled design requires oil/filter changes at 500-hour intervals
after the initial 50-hour service. A grid-heater glow system provides
preheat capabilities, helping operators in cold environments get to work
quickly on cold days.
Back to Top
Lifting
High-boom
telescopic handlers
JCB introduces the first four
models in a new range of high-boom Lift & Place Loadall telescopic
handlers, designed by JCB specifically for American contractors and
rental companies. The units feature larger cabs, side-mounted Tier
3-compliant engines, plus-pattern servo-hydraulic control levers and
rear-axle stabilization on all but the smallest models. The Loadall
506-36 (pictured) provides lift capacity of 6,000 pounds and a working
height of 36 feet. The 507-42 provides 7,000 pounds maximum lift
capacity and a working height of 42 feet. The 509-42 can handle loads up
to 9,000 pounds, while the 510-56 has a 10,000-pound lift capacity and a
working height of 56 feet.
Back to Top
Scissorlift
The Pop-Up Plus+ scissorlift from Pop-Up Products includes a
number of safety features, including LED lights to confirm stabilizer
set up. The unit is easy to operate with hand-set controls for all
elevation and de-elevation functions. The Pop-Up Plus+ offers the same
operational and safety features as the standard Pop-Up compact design,
but with a maximum working height of 14.8 feet. Taking about 16 seconds
to reach full platform height, the Pop-Up Plus+ is battery powered using
a universal charger and provides more than 200 operations on a single
battery charge. Offering a fully extended platform height of 8.2 feet,
the unit is easy to transport, fitting into a small flat-back vehicle.
It can be delivered, positioned and operated by a single person. The
unit features a safe working load of 529 pounds and a platform guardrail
height of 3.6 feet.
Back to Top
Telescopic
big boom
Haulotte introduces the
telescopic big boom HB86 TJ+ (H28 TJ+), which offers a 16-foot, 5-inch
additional reach to operate in most working environments. The unit
features an outreach of 75 feet, 6 inches, an 8-foot platform, and the
capacity to rapidly lift heavy loads up to 772 pounds. The boom and the
jib, with its hexagonal cross section in high-elastic-modulus steel, are
rigid and provide improved stability.
Back to Top
Floorcare
Finishing
machine
The PTX Eco Smart finishing machine from CS Unitec offers balanced
straight-line handling, high torque and electronic speed control. The
unit produces matte, satin and other fine surfaces up to a mirror finish
on steel, stainless steel and nonferrous metals. The PTX is also
designed for coarse grinding jobs such as removing welds, deep
scratches, oxidation, rust and paint.
Back to Top
Finishing
sander
Makita’s model BO4556K
finishing sander features an ergonomically designed rubberized palm that
fits like a glove with even pressure and easy control. These comfort
features are combined with a 2-amp motor that produces 14,000 OPEM for
fast and smooth sanding. In addition, the precision-engineered
all-ball-bearing construction significantly reduces vibration and noise.
Back to Top
Hand-held
floor-covering scraper
General Equipment
introduces the FCS5 Rip-R-Stripper hand-held floor-covering scraper that
is electric-powered and is designed for work in smaller, confined areas.
The FCS5 removes carpet, tile, linoleum and mastics and features a
5-inch cutting width. The unit cuts at 2,500 oscillations per minute and
operates on a standard 115-volt power source and a 1.2-hp electric
motor.
Back to Top
Drain-cleaning Equipment
Portable
drain-cleaning machine
General Pipe Cleaners’
J-1450 Jet-Set electric water jet is a compact and portable
drain-cleaning machine designed for the rental industry. The J-1450 uses
high-pressure water to clear drain lines clogged with grease, sand,
sludge and ice. The overall height of the machine is 29 inches, yet
remove the detachable 200-foot capacity hose reel and the height drops
to 14 feet. The unit also features a slide-out handle to make it easier
to roll to the jobsite.
Back to Top
Drain-cleaning
machine
The Electric Eel Model Z5
drain-cleaning machine is designed for longer runs in 1¼- to 3-inch
drain lines and features a new belt guard constructed of heavy-duty
thermo plastic that mounts securely to the motor with a thumbscrew. The
Model Z5 comes standard with ½-inch by 75-foot genuine galvanized
aircraft wire inner core cable and a heavy-duty 1/3-hp Baldor motor. A
folding handle allows for easy transport and storage.
Back to Top
Other Products
Label
printing system
The Desk Test ‘n’ Tag label printing system from Seaward Group USA is a
special safety tag printing system for easy identification of ‘safe
tested’ electrical appliances for the rental and construction markets.
The label printing system enables users to create highly durable cable
wraps and test tags. The software allows users to incorporate all test
results, equipment IDs, date of test and bar code IDs on a distinctive
label.
Back to Top
Dust-collection
system
Meyer’s Wood-Vac is an engineered dust-collection system that
uses a positive displacement blower with a high-efficiency cyclone
separator and high-capacity cartridge filter to provide improved dust
collection. Other features include an easy-access filter door, dual air
inlets allowing two operators to work independently and a 30-gallon dust
canister.
Back to Top
|
|
You are subscribed to this newsletter as #email#
To get this newsletter in a different format (Text or HTML),
or to change your e-mail address, please visit your profile
page to change your delivery preferences.
For questions concerning delivery of this newsletter, please contact our
Customer Service Department at:
Customer Service Department
RER Magazine
A Penton Media publication
US Toll Free: 866-505-7173
International: 847-763-9504
Email:rermag@pbinews.com
Penton Media | 249 W. 17th Street | New York, NY 10011
Copyright 2008, Penton Media. All rights reserved. This article is
protected by United States copyright and other intellectual property
laws and may not be reproduced, rewritten, distributed, re-disseminated,
transmitted,
displayed, published or broadcast, directly or indirectly, in any medium
without the prior written permission of Penton Media.
|
|
