|
|
Material Handlers
Power
buggies
The Ingersoll Rand PB-Series power buggies from Doosan Infracore Portable
Power are designed to work in a variety of applications and can be
used in concrete spreading, demolition debris removal, landscaping,
material distribution and spot pouring. Equipped with a 13-hp Honda
engine and seven-gallon fuel tank, these units provide operators easy
starting and extended operating intervals. The PB-Series models are
available with either electric or recoil start. The PB-Series comes in
three configurations to carry either wet or dry material loads. Both the
polyurethane bed (PB16) and steel bed (PB16S) will hold up to 16 cubic
feet of material. The landscape bed on the PB16L will hold up to 10
cubic feet of material.
Back to Top
Telehandlers
Three new high-performance telehandlers from New Holland feature long reach,
added power, operator comfort, improved serviceability and enhanced
visibility. The New Holland M427, M428 and M459 meet a variety of
lift-and-place and lift-and carry requirements and are sized to work
productively in a variety of applications, including commercial and
residential construction, agriculture and landscaping.
Back to Top
Abrasives & Blades
Split-segment
blades
Wacker
Neuson’s 12-inch and 14-inch diameter split-segment blades are
designed to offer versatility, fast cutting, longer life and lower
vibrations. The key to the technology is the increased number of
segments. By doubling the number of segments, the angle of contact to
the material is reduced to provide faster cutting with lower vibrations.
Additionally, there are more exit points for dust particles, keeping the
blade cooler and increasing its usable life. The combination of a softer
bond and increased air flow allows these blades to work on a variety of
materials.
Back to Top
Diamond
blades
The Side Winder II diamond blades from Multiquip are available in 12- and
14-inch models and feature a ribbed core that reduces friction and heat
while providing faster cutting and application versatility. The
blades’ T-shape diamond segment design enhances fast cutting
performance, making them suitable for cured concrete, brick, block, and
asphalt and green concrete. The T-shape design also provides
undercutting core protection, preserving the integrity of the steel core
while extending blade life and providing a greater return on investment.
Back to Top
Pipe-cutting
wheels
The new Abmast resin-bonded PVC
pipe-cutting wheels are designed to cut PVC pipe safely and securely on
high-speed gas or electric saws. These wheels are made with three layers
of fiberglass reinforcements and come in 12-inch, 14-inch and 16-inch
diameters, 5/32-inch thickness and are available with a 1-inch or a
20-mm arbor.
Back to Top
Trailers
Tandem-axle
equipment trailer
The Ditch Witch T9B trailer
is an easy-towing, fixed-bed, tandem-axle equipment trailer designed to
transport several models of Ditch Witch underground construction
equipment. The trailer is 96 inches wide and 218 inches long. The
maximum hauling capacity is 7,150 pounds and the standard gross vehicle
weight rating is 9,500 pounds. Other features include adjustable hitch
coupler and D-rings for securing equipment and shock-mounted clearance,
tail and stop lights.
Back to Top
Utility
trailer
The Fold-Up utility trailer from Lifetime Products combines
space-saving technology with the functionality and durability of a
traditional work hauler. After operators have hauled their equipment,
they use the easy-to-operate crank to fold the trailer to 29 inches wide
in less than 90 seconds. The heavy-duty trailer comes in three sizes —
4-foot by 6-foot, 5-foot by 6-foot, and 5-foot by 8-foot — and holds
1,000 to 1,500 pounds.
Back to Top
Outdoor Power Equipment
Light
tower
The Terex AL8000 HT light tower
features 28 feet of vertical height, 20 feet of horizontal outreach and
359 degrees of powered-boom rotation. The light bar on the AL8000 HT
tilts 180 degrees vertically, allowing operators to extend and rotate
the mast into multiple operating positions. Each light also pivots in
two perpendicular directions — front-to-back and 360 degrees
side-to-side — to position the light fixtures in a precise direction.
The light tower comes standard with four 1,000-watt lights, a 13.6-hp
Kubota engine and a 30-gallon fuel tank.
Back to Top
Reel
mowers
Mantis
introduces two new reel mowers; a manually-operated push mower and a
battery-powered cordless mower. The reel mowers feature a contact-free
blade system — the blade is designed to miss the bed knife by less
than a millimeter, reducing friction and yielding a more scissor-like
precision cut. The friction-free five blade reel cylinder is constructed
of flame-hardened steel. The eco-friendly mowers emit no emissions and
are quiet in operation. The manually powered push reel mower weighs 16
pounds and the battery-powered unit weighs 25 pounds.
Back to Top
Generators
Inverter
generator line
Subaru introduces its
inverter generator line that includes the R1700i at 1,650 watts, the
RG3200iS at 3,200 watts and the RG4300iS (pictured) at 4,300 watts. The
inverter generators run the engine at a lower speed for low power use
and automatically increase speed as more electrical power is required.
Producing clean power for sensitive electronic equipment, the R1700i is
powered by Subaru’s EH09-2 overhead valve gasoline engine, while the
RG3200iS and RG4300iS models are powered by Subaru’s EX overhead cam
gasoline engines. Voltage and frequency are electronically controlled to
maintain accuracy through the full power range.
Back to Top
Generators
All EB Series Honda generators come
standard with full generator GFCI circuit protection for OSHA-regulated
jobsites. The EB3800, EB5000 and EB6500 models use a Honda
commercial-grade overhead-valve engine. This quiet, four-stroke engine,
acoustically tuned muffler and airflow systems boast low decibel levels.
These models feature a 6.6-gallon fuel tank, easy-access outlet panel,
an additional duplex outlet and an oil alert. They also come standard
with a wheel kit for easy transport and a hanger kit for lifting units
with cranes and securing units left on jobsites overnight.
Back to Top
Generator
range
Baldor Electric offers
generators ranging from 1 to 2,000 kW. Each generator, stock or custom,
is designed to NEMA, NFPA110, CSA and UL standards. The generator
products include industrial portables from 3 to 11 kW, towables from 20
to 400 kW and diesel-engine-powered gensets. Baldor also offers a mobile
light tower, Model PL6000K, which features 4,000 watts of light to
provide light coverage for 5 to 7 acres, and s 50-gallon diesel fuel
tank provides for 100 hours of operation.
Back to Top
|
|
You are subscribed to this newsletter as #email#
To get this newsletter in a different format (Text or HTML),
or to change your e-mail address, please visit your profile
page to change your delivery preferences.
For questions concerning delivery of this newsletter, please contact our
Customer Service Department at:
Customer Service Department
RER Magazine
A Penton Media publication
US Toll Free: 866-505-7173
International: 847-763-9504
Email:rermag@pbinews.com
Penton Media | 249 W. 17th Street | New York, NY 10011
Copyright 2008, Penton Media. All rights reserved. This article is
protected by United States copyright and other intellectual property
laws and may not be reproduced, rewritten, distributed, re-disseminated,
transmitted,
displayed, published or broadcast, directly or indirectly, in any medium
without the prior written permission of Penton Media.
|
|
